1.2 KiB
| title |
|---|
| Home Automation |
Step 1. - Switches & Firmware
Sonoff Basic On Amazon Rs. 650 ESPEasy
Step 2. - Load ESP Easy firmware on it
A good blog
The firware is ESP_Easy_mega-20190630_normal_ESP8266_1M
The pin connection is easy. Add the header to the pin out from the I2C programming board and connect the RX -> TX and TX -> RX. 3.3v.
Just unplug the 3.3v line and press the reset button while connecting it to go into programming mode and then flash using the flasher which is downloaded with the firmware
Step 3. - Configure the firmware for Sonoff
Under "Hardware": Wifi Status LED -> GPIO-13 (D7) Inversed LED -> Checked
Under "Devices":
Edit Task 1
Device: is Switch input - Switch
Name is Doesn't Matter
Enabled is Checked
GPIO is GPIO-12 (D6)
Switch Type is Switch
Switch Button Type is Normal Switch
Step 4. - Test
Off = http://${IP_ADDRESS}/control?cmd=GPIO,12,0
On = http://${IP_ADDRESS}/control?cmd=GPIO,12,0