conditions and advanced target

* Add  pre-post actions
  * post will only be executed if light is not turned off to disable the automation
* Add minimum starting brightness for light
* Make Workday sensor optional by using multiple

parabolic_alarm.yaml

@@ -3,6 +3,18 @@ blueprint:
   description: Turn a light on based on a start time, whether it is a workday and whether a person is home. This is to match the sunrise and allow for a natural wake up.
   domain: automation
   input:
+    pre_action:
+      name: 🎮 Pre Script Action
+      description: An action you want to perform before the lights turn on.
+      default: []
+      selector:
+        action: {}
+    conditions:
+      name: Conditions
+      description: Set your own conditions for this automation. All conditions must pass unles you add your own OR block
+      default: []
+      selector:
+        condition:
     alarm_start_time:
       name: 🕒 Start Time
       description:
@@ -18,31 +30,10 @@ blueprint:
           multiple: false
     offset_from_start_time:
       name: 🏁 Offset From Start Time
-      description:
-        Adjust the amount of time before or after the set Start Time value to start the transition. Enter seconds or HH:MM:SS format (e.g. "-00:05:00" to start 5 minutes before the Start Time. Useful if the start time comes from an alarm entity and you want to adjust where in the brightness cycle you are when the alarm goes off. See https://www.home-assistant.io/docs/automation/trigger/#sensors-of-datetime-device-class-with-offsets for caution about using positive offsets.
+      description: Adjust the amount of time before or after the set Start Time value to start the transition. Enter seconds or HH:MM:SS format (e.g. "-00:05:00" to start 5 minutes before the Start Time. Useful if the start time comes from an alarm entity and you want to adjust where in the brightness cycle you are when the alarm goes off. See https://www.home-assistant.io/docs/automation/trigger/#sensors-of-datetime-device-class-with-offsets for caution about using positive offsets.
       default: "-00:00:00"
       selector:
         text:
-    workday_sensor:
-      name: 📆 Workday Sensor
-      description:
-        Binary Sensor that is used to determine whether it should run. Typically
-        from Workday Integration. More information here - https://www.home-assistant.io/integrations/workday/
-      selector:
-        entity:
-          filter:
-            - domain:
-                - binary_sensor
-          multiple: false
-    person_sensor:
-      name: 👤 Person Sensor
-      description: Select the person sensor so that the alarm will only run when you are home.
-      selector:
-        entity:
-          filter:
-            - domain:
-                - person
-          multiple: true
     alarm_script:
       name: 📄 Script to trigger
       description: Light Alarm Script
@@ -53,14 +44,12 @@ blueprint:
                 - script
           multiple: false
     target_light:
-      name: 💡 Lights
-      description: The light(s) with kelvin
+      description: A single light or group
       selector:
         entity:
           filter:
-            - domain:
-                - light
-          multiple: false
+            domain: light
+      name: Target Light
     light_timeout:
       name: ⏱️ Timeout
       description: Light will turn off after this time on last run. Setting this to 0 will leave the light on.
@@ -83,6 +72,16 @@ blueprint:
           max: 60.0
           step: 1.0
           mode: slider
+    start_brightness:
+      name: ⭐️ Start Brightness
+      description: Starting value for brightness
+      selector:
+        number:
+          min: 1.0
+          max: 100.0
+          step: 1.0
+          mode: slider
+      default: 1.0
     start_kelvin_temp:
       description: Start Kelvin value (warm) for 1st run
       selector:
@@ -171,6 +170,12 @@ blueprint:
           step: 1.0
           mode: slider
       default: 5
+    post_action:
+      name: 🎮 Post Script Action
+      description: An action you want to run after the script has finished
+      default: []
+      selector:
+        action: {}
   source_url: https://github.com/steku/ha_cercadian_alarm/blob/main/parabolic_alarm.yaml
 trigger:
   - trigger: time
@@ -178,17 +183,16 @@ trigger:
       entity_id: !input alarm_start_time
       offset: !input offset_from_start_time
 condition:
-  - condition: state
-    entity_id: !input workday_sensor
-    state: "on"
-  - condition: state
-    entity_id: !input person_sensor
-    state: "home"
+  condition: and
+  conditions: !input conditions
 action:
+  - choose:
+      - conditions: []
+        sequence: !input pre_action
   - action: light.turn_on
     data:
       color_temp_kelvin: !input start_kelvin_temp
-      brightness_pct: 1
+      brightness_pct: !input start_brightness
       entity_id: !input target_light
   - delay:
       seconds: 5
@@ -229,4 +233,7 @@ action:
           steps_per_minute: !input steps_per_minute
           light_timeout: !input light_timeout
           target_light: !input target_light
+      - choose:
+          - conditions: []
+            sequence: !input post_action
 mode: single

parabolic_alarm_script.yaml

@@ -112,7 +112,7 @@ sequence:
             seconds: "{{ individual_step }}"
         - if:
             - condition: template
-              value_template: "{{ is_state(target_light, 'on') }}"
+              value_template: "{{ not is_state(target_light, 'off') }}"
           then:
             - data:
                 brightness: "{{ brightness }}"
@@ -126,7 +126,7 @@ sequence:
           - condition: template
             value_template: "{{ light_timeout != 0 }}"
           - condition: template
-            value_template: "{{ is_state(target_light, 'on') }}"
+            value_template: "{{ not is_state(target_light, 'off') }}"
     then:
       - delay:
           minutes: "{{ light_timeout }}"