tanshu/grav
1
0
Fork 0
Code Issues Pull Requests Releases Activity

(Grav GitSync) Automatic Commit from tanshu

Browse Source
This commit is contained in:
tanshu 2019-07-26 20:54:06 +00:00 committed by GitSync
parent b38d30c747
commit d6b2b2ca2c
1 changed files with 14 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
pages/12.home-automation/docs.md
View File

@ -4,29 +4,41 @@ title: 'Home Automation'
# Step 1. - Switches & Firmware # Step 1. - Switches & Firmware
Sonoff Basic [On Amazon Rs. 650](https://www.amazon.in/gp/product/B06WWNBD3Y/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1) Sonoff Basic [On Amazon Rs. 650](https://www.amazon.in/gp/product/B06WWNBD3Y/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1)
[ESPEasy](https://github.com/letscontrolit/ESPEasy/releases) [ESPEasy](https://github.com/letscontrolit/ESPEasy/releases)
# Step 2. - Load ESP Easy firmware on it # Step 2. - Load ESP Easy firmware on it
[A good blog](https://randomnerdtutorials.com/sonoff-basic-switch-esp-easy-firmware-node-red/) [A good blog](https://randomnerdtutorials.com/sonoff-basic-switch-esp-easy-firmware-node-red/)
The firware is ```ESP_Easy_mega-20190630_normal_ESP8266_1M``` The firware is ```ESP_Easy_mega-20190630_normal_ESP8266_1M```
The pin connection is easy. Add the header to the pin out from the I2C programming board and connect the RX -> TX and TX -> RX. 3.3v. The pin connection is easy. Add the header to the pin out from the I2C programming board and connect the RX -> TX and TX -> RX. 3.3v.
Just unplug the 3.3v line and press the reset button while connecting it to go into programming mode and then flash using the flasher which is downloaded with the firmware Just unplug the 3.3v line and press the reset button while connecting it to go into programming mode and then flash using the flasher which is downloaded with the firmware
# Step 3. - Configure the firmware for Sonoff # Step 3. - Configure the firmware for Sonoff
Under "Hardware": ###### Under "Hardware":
Wifi Status LED -> GPIO-13 (D7) Wifi Status LED -> GPIO-13 (D7)
Inversed LED -> Checked Inversed LED -> Checked
Under "Devices": ###### Under "Devices":
Edit Task 1 Edit Task 1
`Device:` is `Switch input - Switch` `Device:` is `Switch input - Switch`
`Name` is `Doesn't Matter` `Name` is `Doesn't Matter`
`Enabled` is `Checked` `Enabled` is `Checked`
`GPIO` is `GPIO-12 (D6)` `GPIO` is `GPIO-12 (D6)`
`Switch Type` is `Switch` `Switch Type` is `Switch`
`Switch Button Type` is `Normal Switch` `Switch Button Type` is `Normal Switch`
# Step 4. - Test # Step 4. - Test
`Off` = `http://${IP_ADDRESS}/control?cmd=GPIO,12,0` `Off` = `http://${IP_ADDRESS}/control?cmd=GPIO,12,0`
`On` = `http://${IP_ADDRESS}/control?cmd=GPIO,12,0` `On` = `http://${IP_ADDRESS}/control?cmd=GPIO,12,0`